One costume, three fabrics — and each one does a different job
Every great costume is really three decisions at once: the texture, the print and the shine. The texture makes an animal costume feel like fur. The print makes a leopard read as a leopard from across the room. The shine makes a superhero or a stage performer catch the light before anyone sees the face. Get those three decisions right and a homemade costume looks like a bought one.
Faux fur, velboa and metallic lamé cover those three decisions between them. Faux fur gives you long, shaggy texture. Velboa gives you bold animal print in a short, easy-to-sew pile. Metallic lamé gives you the shine, with stretch that moves with the body. This guide explains what each one is, what it is best for, and how to mix them.
Faux fur: the long-pile texture
Faux fur is the drama fabric. Our Luxury Shaggy Faux Fur Fabric by the Yard is 100% polyester, 60 inches wide, with an extra-long, fluffy pile and a realistic fur-like finish, sold by the yard in continuous cuts. The pile is the point: it reads as real fur, and a single piece — a collar, a cape, a hood — changes the whole costume.
That long pile is also what makes faux fur the hardest of the three to sew. The pile gets into the seams, the fabric sheds as you cut it, and the finished piece needs a shake and a brush before it looks its best. The payoff is worth it for anything that needs to look wild: animal costumes, mascots, fursuits, winter coats, yeti and monster outfits, and cosplay where the fur is the character. Keep the pile direction consistent across every piece — fur that runs in different directions looks patchy — and cut from the back so you cut the backing, not the pile. Our sewing with faux fur guide covers cutting, seaming and shedding.
Velboa: the bold animal print
Velboa is the practical costume fabric. Our Animal Print Velboa Faux Fur Fabric by the Yard is an ultra-soft, lightweight plush with a short, dense pile and bold animal prints, 60 inches wide, in 9 prints: giraffe, tiger, dalmatian, cow in black and white or brown, and leopard in pink and white, black and white, gold and white or purple. The prints are large-scale and photogenic — a dalmatian costume reads instantly from across the room.
Velboa’s short pile is what makes it so beginner-friendly. It cuts cleanly, the edges do not fray the way long-pile furs do, and the seams stay tidy without special equipment, so a first costume sewn in velboa looks far better than one sewn in shaggy fur. It is the right choice when the print matters more than the pile: animal onesies and Halloween outfits, pet beds and toys, themed party décor and photo props. It is also the right choice for anything a child will wear: light, soft and easy to wash. Our What Is Velboa? guide explains the fabric, and our Faux Fur vs Velboa comparison puts the two head to head.
Metallic lamé: the shine that stretches
Metallic lamé is the stage fabric. Our Metallic Foil Fabric by the Yard is a shiny polyester-spandex blend with an all-over foil finish and 2-way to 4-way stretch, 58/60 inches wide, cut as one continuous piece, in 7 high-shine colours: Black, Fuchsia, Gold, Purple, Red, Royal Blue and Silver. The foil catches every light, and the stretch means the fabric moves with the body — which is why it is the fabric for dancewear, costumes and performance looks that need to flex, not fight.
Lamé is the easiest of the three to fit and the trickiest to sew neatly. The stretch forgives a lot in fitting — leggings, bodysuits, fitted capes and gowns all sit better in a fabric that gives — but the foil surface shows every pin hole and uneven stitch, so sew with a stretch needle, a slightly longer stitch, and as few pins as you can manage. Line it where it sits against skin for long performances, and keep the iron away from the foil: press from the wrong side on low heat, or skip pressing.
Which fabric for which costume?
Match the fabric to the character, not to the pattern. Choose shaggy faux fur when the costume needs to look wild or wintry: a wolf, a yeti, a lion mane, a fur-trimmed coat or a mascot. The long pile does the acting for you, and one fur piece is often enough — a fur hood or a fur cape over a plain base outfit reads as a full costume. Choose velboa when the costume needs a recognisable print: a dalmatian, a leopard, a tiger, a cow. The print is the character, and velboa’s short pile keeps the print crisp.
Choose metallic lamé when the costume needs to shine or to move: a superhero cape and bodysuit, a disco dancer, a mermaid tail, a robot, a pop-star outfit, a dance costume. The foil finish reads as metal, mirror or magic depending on the colour, and the stretch means the costume fits the performer. Lamé photographs brilliantly, so the costume looks as good in photos afterwards as on stage.
Mixing all three in one costume
The best costumes rarely use one fabric alone. A leopard velboa bodysuit with a shaggy faux fur collar and a gold lamé cape is three fabrics doing three jobs: the print reads as the animal, the fur reads as the wildness, the shine reads as the fantasy. A superhero outfit in lamé with a faux fur trim looks richer than lamé alone. A winter queen in lamé with a full faux fur cape looks like a character, not a dress.
When you mix them, sew the easy fabric first. Build the velboa base, add the lamé panels, and finish with the fur trim — fur last, because it sheds into everything it touches and you do not want pile in your lamé seams. Keep the pile direction the same on every fur piece. For a child, make the velboa the layer against the skin and the fur and lamé the outer layers.
Shop costume fabrics by the yard
Shop Luxury Shaggy Faux Fur — 100% polyester, 60 inches wide, extra-long pile — for wild texture, Animal Print Velboa — 60 inches wide, short dense pile, 9 bold prints — for animal costumes that read instantly, and Metallic Foil Lamé — polyester-spandex, all-over foil finish, 2-way to 4-way stretch, 58/60 inches wide, 7 colours — for shine that moves with the body. Browse the full Faux Fur collection at ValentinaTextile.com, with every cut in one continuous piece.
Frequently asked questions
Is velboa or faux fur better for a first costume?
Velboa, by a clear margin. Its short, dense pile cuts cleanly, the edges do not fray, and the seams stay tidy without special equipment. Save the long-pile faux fur for the trim or the statement piece, where its drama is worth the extra work.
Can you machine-wash a costume made from these fabrics?
Velboa is the easiest to care for. Faux fur should be hand-washed cold or spot-cleaned and shaken out to restore the pile, and metallic lamé should be hand-washed cold and laid flat to dry — never iron the foil, and never tumble-dry any of the three.
How much fabric do I need for a costume?
For an adult onesie or bodysuit, allow two to three yards of your main fabric at 60 inches wide, plus one yard of accent fabric for trim, a collar or a cape. For a child’s costume, one and a half to two yards of the main fabric is usually enough.












